Go
New
Find
Notify
Tools
Reply
  
Trans question
 Login/Join
 
DRR Sportsman
Picture of Ron Gusack
posted
If I buy a sfi case for a TH400 will my stock case internals be usable?
Does a roller bearing tail shaft require a different yoke or drive shaft length than the stock bushing type?
 
Posts: 459 | Location: Maryland | Registered: January 23, 2007Reply With QuoteReport This Post
DRR Sportsman
posted Hide Post
You will need a hardened yoke, not sure about the rest
 
Posts: 604 | Location: nw ohio | Registered: November 20, 2001Reply With QuoteReport This Post
DRR Pro
Picture of Alaskaracer
posted Hide Post
I think everything will work except for the center support and intermediate clutch pack. You have to have one that's made to fit the case because it has lugs all the way around the case. Not 100% certain on that though......


Mark Goulette
Owner/Driver of the Livin' The Dream Racing dragster
www.livinthedreamracing.com
"Speed kills but it's better than going slow!"
Authorized Amsoil Retailer
 
Posts: 1465 | Location: Back home in Alaska! | Registered: February 13, 2011Reply With QuoteReport This Post
  Powered by Social Strata  
 


© DragRaceResults.com 2024