1.58 gear set in a powerglide for medium dragster

quote:
Originally posted by DragRaceResults:
FYI there's a for sure difference in quality of the 1.69 and 1.65. I had the 1.65's in my 2018 cars because there was a rash of breakage with the 1.69's that I was aware of.

I have to say I've learned a lot the past couple years. Almost sold my 1.58's last winter. Backed out of the deal with the guy and decided to stay with it. Glad I did now. With this new tire I'm not afraid to add some gear. Will be real interesting.

Did it change the way the converter acted changing gears in trans? Did changing rear gears make the converter more efficient?

Posts: 75 | Location: nitrousville | Registered: January 30, 2012

Ignored post by Nitrous1 posted

DRR Top Comp

posted

4.30's with a 585 n/a 4 link dragster.

Think it's a 1.80? Think again.

Transmission Specialties has a 1.64 holding up and going 154mph @3200 lbs on radials.

It's rated for 2200 hp. Best I've seen next to the Sonnax gearsets. Heavy duty.

Posts: 9398 | Location: Madeira Beach Fl. | Registered: June 12, 2018

Ignored post by Mike Rietow posted

DRR Elite

posted

quote:
Originally posted by The Bozman:
if you are in a suspended dragster regardless of track conditions and running 4.40's-50's in the 1/8th then the GRID will do a ton of work for you.

put the 1.80 in and make sure you have some tunes in the GRID for those iffy track conditions.

this^^^

running a 1.58 in the OP's car is a waste of time, money and WILL run a tenth or more slower without running a lot more rear gear as Marco Abruzzi has told the OP.

FYI, the highest track temp we saw last season was 138 degrees on our way to an 8 round, $10K win in brutally HOT conditions and we launched every round with full power at the hit from our 1300HP 648 backed by a 1.80 1st gear glide, 4.30 rear gear and rolling on Hoosier's C1550 slicks

but we have a grid and have a tune IF we ever encounter a track we can't get off the starting line under full power at the hit.

Posts: 13522 | Location: NJ | Registered: August 20, 2000

Ignored post by 1320racer posted

67TSCHEVY2

DRR Pro

posted

save your money and of course changing either gear will affect the converter efficiancy

This message has been edited. Last edited by: 67TSCHEVY2,

Posts: 1238 | Location: middle georgia | Registered: July 20, 2003

Ignored post by 67TSCHEVY2 posted

DRR Elite

posted

and another

67TSCHEVY2…KNOWS!

Posts: 13522 | Location: NJ | Registered: August 20, 2000

Ignored post by 1320racer posted

DragRaceResults

DRR / Crew

posted

And for what it's worth. I wouldn't suggest the 1.58 either. There is a ton of learning curve. Depending on your combo, it could kill it ET wise. We have done a ton of testing in real world conditions. Converter, gear, timing, etc. Like I mentioned just decided to stick with it.

For the record we back to backed a 1.80 / 1.65 - 4.10 and it was .07 in the 1/8th with our combo. 1100hp, 8" converter at the time. So yes get ready for some ET loss with the loss of gear in the transmission if you make no other changes.

SL... enjoy

www.dragraceresults.com

Posts: 2109 | Location: Gallatin, TN - U.S.A. | Registered: October 12, 2009

Ignored post by DragRaceResults posted

DRR Elite

posted

The TRUTH AND FACTS^^^

Again, it’s unanimous amongst those that actually race a “medium” dragster as well several that race a much quicker Top Dragster, the majority of which according to our self proclaimed, all knowing, wannabe heads up racer, resident retard are “know nothing, do nothing, monkey see monkey do, crate engine buying racers” that the OP should stay with a 1.80 as I stated on page 1 in my 1st reply as well he will lose a significant amount of ET if he chooses to run a 1.58

This message has been edited. Last edited by: 1320racer,

Posts: 13522 | Location: NJ | Registered: August 20, 2000

Ignored post by 1320racer posted

The Bozman

DRR S/Pro

posted

ED,
In the heat the OP is running 138 degree track temps after midnight, we typically run in the 150-165 track temp from May to September in the south and Texas type heat. A lot of difference between 135 and 155-165 track temp. That is why I said there is a lot of difference depending on where you run and also the track prep for different race tracks. The grid will help a lot in that area.

I still think the 1.80 is the way to go, I am actually going tighter on the convertor when everyone else is going to looser. Just a different way to skin a cat, we are putting our dial in on the board and it isn't about getting everything out of your combination; consistency wins !!

Will be interesting to see how the OP gets to the starting line ratio as the finish line ratio will not change unless the gear is changed, which will definitely raise the RPM.

Keeping the Socialists and NEO-LIBERALS at bay with FACTS one post at a time !!!

Freedom isn't free !!! Thank a veteran, they will actually appreciate it.

Posts: 2497 | Location: Gilmer, Texas | Registered: June 25, 2002

Ignored post by The Bozman posted

DRR Elite

posted

Steve, as you said, nothing that the grid can’t compensate for IF after tuning his suspension to get down any track at any temp which I’m confident my car can which you have seen inaction.

Posts: 13522 | Location: NJ | Registered: August 20, 2000

Ignored post by 1320racer posted

DRR Top Comp

posted

quote:
Originally posted by DragRaceResults:
JH - I've had 1.58's in my new cars for 2 years now. I've learned a lot.

quote:
Originally posted by DragRaceResults:
There is a ton of learning curve.

It's not a matter of right or wrong, it's a matter of know how.

Posts: 9398 | Location: Madeira Beach Fl. | Registered: June 12, 2018

Ignored post by Mike Rietow posted

TOP38

DRR S/Pro

posted

quote:
Originally posted by Mike Rietow:
quote:
Originally posted by DragRaceResults:
JH - I've had 1.58's in my new cars for 2 years now. I've learned a lot.

quote:
Originally posted by DragRaceResults:
There is a ton of learning curve.

It's not a matter of right or wrong, it's a matter of know how.

Well there's one thing we all know you know how to do and that's destroying the orange foam boxes!!!!!!!!!!!!!!!!!

Posts: 2149 | Location: Tewksbury, MA,USA | Registered: November 03, 2000

Ignored post by TOP38 posted

Jonesz

DRR Sportsman

posted

quote:
Originally posted by Mike Rietow:
quote:
Originally posted by DragRaceResults:
JH - I've had 1.58's in my new cars for 2 years now. I've learned a lot.

quote:
Originally posted by DragRaceResults:
There is a ton of learning curve.

It's not a matter of right or wrong, it's a matter of know how.

Most of us here have went much much faster lifting at 330 than ole Mikey ever has...

Posts: 122 | Location: Over here | Registered: November 28, 2007

Ignored post by Jonesz posted

Jonesz

DRR Sportsman

posted

quote:
Originally posted by Jonesz:
quote:
Originally posted by Mike Rietow:
quote:
Originally posted by DragRaceResults:
JH - I've had 1.58's in my new cars for 2 years now. I've learned a lot.

quote:
Originally posted by DragRaceResults:
There is a ton of learning curve.

It's not a matter of right or wrong, it's a matter of know how.

Most of us here have went much much faster lifting at 330 than ole Mikey ever has flat out....

Posts: 122 | Location: Over here | Registered: November 28, 2007

Ignored post by Jonesz posted

DRR Top Comp

posted

quote:
Originally posted by Jonesz:
quote:
Originally posted by Jonesz:
quote:
Originally posted by Mike Rietow:
quote:
Originally posted by DragRaceResults:
JH - I've had 1.58's in my new cars for 2 years now. I've learned a lot.

quote:
Originally posted by DragRaceResults:
There is a ton of learning curve.

It's not a matter of right or wrong, it's a matter of know how.

Most of us here have went much much faster lifting at 330 than ole Mikey ever has flat out....

But have you gone faster than everyone else on the planet, same combo? No.

Know how.

Posts: 9398 | Location: Madeira Beach Fl. | Registered: June 12, 2018

Ignored post by Mike Rietow posted

Bucky

DRR Elite

posted

quote:
Originally posted by DragRaceResults:
And for what it's worth. I wouldn't suggest the 1.58 either. There is a ton of learning curve. Depending on your combo, it could kill it ET wise. We have done a ton of testing in real world conditions. Converter, gear, timing, etc. Like I mentioned just decided to stick with it.

For the record we back to backed a 1.80 / 1.65 - 4.10 and it was .07 in the 1/8th with our combo. 1100hp, 8" converter at the time. So yes get ready for some ET loss with the loss of gear in the transmission if you make no other changes.

SL... enjoy

Would more first gear ratio be even faster? Maybe it is a moot point since higher ratios aren't available in the stronger lines I looked at.

Foxtrot Juliet Bravo

Posts: 6397 | Location: Illinois | Registered: July 08, 2004

Ignored post by Bucky posted

"The Bender"

DRR S/Pro

posted

quote:
Originally posted by Jonesz:

Most of us here have went much much faster lifting at 330 than ole Mikey ever has flat out....

[/QUOTE]

Well, I've been 2.42 to the 330', so........

272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.

Posts: 3096 | Location: Yes | Registered: July 08, 2009

Ignored post by "The Bender" posted

CURTIS REED

DRR Pro

posted

quote:
Originally posted by "The Bender":
quote:
Originally posted by Jonesz:

Most of us here have went much much faster lifting at 330 than ole Mikey ever has flat out....

Well, I've been 2.42 to the 330', so........[/QUOTE]

Quickest Oldsmopar ever.

____________________________
2017 and 2018 Osage Casinos Tulsa Raceway Park No-Box Champion

2018 Div4 Goodguys Hammer award winner

Posts: 2932 | Location: KIEFER, OK. | Registered: August 17, 2007

Ignored post by CURTIS REED posted

"The Bender"

DRR S/Pro

posted

quote:
Originally posted by CURTIS REED:
quote:
Originally posted by "The Bender":
quote:
Originally posted by Jonesz:

Most of us here have went much much faster lifting at 330 than ole Mikey ever has flat out....

Well, I've been 2.42 to the 330', so........

Quickest Oldsmopar ever.[/QUOTE]

LOL!!

Posts: 3096 | Location: Yes | Registered: July 08, 2009

Ignored post by "The Bender" posted

DRR Top Comp

posted

quote:
Originally posted by TOP38:
quote:
Originally posted by Mike Rietow:
quote:
Originally posted by DragRaceResults:
JH - I've had 1.58's in my new cars for 2 years now. I've learned a lot.

quote:
Originally posted by DragRaceResults:
There is a ton of learning curve.

It's not a matter of right or wrong, it's a matter of know how.

Well there's one thing we all know you know how to do and that's destroying the orange foam boxes!!!!!!!!!!!!!!!!!

Is this your audition for a job with CNN maggot?

Posts: 9398 | Location: Madeira Beach Fl. | Registered: June 12, 2018

Ignored post by Mike Rietow posted

Nitrous1

DRR Trophy

posted

Decided to buy a new 1.80 gear set. If anyone is interested in a used 1.58 and a dump PM me

Posts: 75 | Location: nitrousville | Registered: January 30, 2012

Ignored post by Nitrous1 posted