DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    longer tire screws
Go
New
Find
Notify
Tools
Reply
  
longer tire screws
 Login/Join
 
DRR Trophy
posted
Fresh Lil Bubbas & the 3/4" long tire screws don't penetrate the bead very far (I know should be bead locks). Where can one get hardened #14 x 1" hex head screws? Are they sheet metal screws?
 
Posts: 29 | Location: Utica, IL | Registered: May 29, 2000Reply With QuoteReport This Post
DRR S/Pro
posted Hide Post
I don't have and answer for you. But you couldn't have had worse timing. Ed is back, out on a work release program, so you will likely be entitled to his renown wisdom in this area.


Illegitimi non carborundum
 
Posts: 2323 | Location: OKC, OK | Registered: February 15, 2008Reply With QuoteReport This Post
DRR Pro
posted Hide Post
Sell um....get BEADLOCKS....I’ve seen two sets blown off...but it’s your azz...
 
Posts: 1247 | Location: USA | Registered: December 04, 2008Reply With QuoteReport This Post
DRR Pro
Picture of RacerVX54
posted Hide Post
quote:
Originally posted by WHOMPWHOMP:
Sell um....get BEADLOCKS....I’ve seen two sets blown off...but it’s your azz...


What he said beadlocks.. Pretty sure it stamped on the tire. Seen a set pop off the bead during a burnout..


"Just Shut Up and Race"

Brian Martin
Martin Racing
5.66 @121.55
 
Posts: 1383 | Location: Va.Beach .Va | Registered: August 03, 2005Reply With QuoteReport This Post
DRR Pro
Picture of TORQIN
posted Hide Post
I have to agree...the tire says beadlocks only if I am not mistaken?
 
Posts: 1749 | Location: Houston, Tx. | Registered: November 27, 2008Reply With QuoteReport This Post
DRR Sportsman
Picture of TD3550
posted Hide Post
quote:
Originally posted by J Allen:
Fresh Lil Bubbas & the 3/4" long tire screws don't penetrate the bead very far (I know should be bead locks). Where can one get hardened #14 x 1" hex head screws? Are they sheet metal screws?


Who knows when 66 will be open.. Wild guess. Didn't ever hear anything on certs or ETI's for a matter of fact. How have you been?
 
Posts: 1408 | Location: Under a Truck | Registered: August 23, 2013Reply With QuoteReport This Post
DRR Pro
posted Hide Post
Send them to Neil & Parks and have DBL installed. They can turn them around in less than a week. Did mine same day as received. Beautiful conversion.
 
Posts: 2428 | Location: 53056 | Registered: December 30, 2009Reply With QuoteReport This Post



DRR S/Pro
Picture of Big Steve
posted Hide Post
quote:
Originally posted by TORQIN:
I have to agree...the tire says beadlocks only if I am not mistaken?


Tire actually says Beadlocks recommended but you would have to be crazy to run them without. Like others have said, more than one set has come off the rim on racers who have tried
 
Posts: 2395 | Location: Moving back to the door side | Registered: April 30, 2010Reply With QuoteReport This Post
DRR Elite
posted Hide Post
I don’t see anything on the website about beadlocks. But there is a recommended tube.


Foxtrot Juliet Bravo
 
Posts: 6352 | Location: Illinois | Registered: July 08, 2004Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
poor guy just wanted info on screws
 
Posts: 61 | Location: Larwill,In | Registered: September 18, 2011Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
J check out ace hardware they have them in stainless


The difference between ignorance and stupidity. Ignorance is lack of knowledge. Stupidity is the inability to learn. Don't be stupid
 
Posts: 394 | Location: des moines iowa | Registered: January 10, 2020Reply With QuoteReport This Post
DRR Sportsman
Picture of Richie
posted Hide Post
J Allen, you can also check out McMaster.com
 
Posts: 254 | Location: Windsor locks Ct. | Registered: November 25, 2004Reply With QuoteReport This Post
DRR Top Comp
posted Hide Post
Since this post has already drifted away from screws to beablocs, I'm going to take the opportunity to broach an idea.....

What if someone was to drill say 14 even placed h0les in the bead of a slick and press in flanged, threaded inserts from the back/inside. Then drill holes in the same pattern in the rim and thread bolts through the h0les into the inserts and tighten them up for a different type of beadloc? Almost like rim screws on steroids...

Just thinking out loud.....


.
Dave



F J B

 
Posts: 4440 | Location: Earth | Registered: February 08, 2006Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
I like the home made beadlock-ish idea!
 
Posts: 58 | Location: st louis mo | Registered: April 15, 2012Reply With QuoteReport This Post



DRR Top Comp
posted Hide Post
It wouldn't have to be home made...establish a standard and tires could come with the insert already installed or molded into the bead during the manufacturing process. a smart aftermarket guy could design and sell a template to drill matching h0les in existing rims. And new rims could be ordered with or without the h0les.
pulling the bead tight against the rim lip and the shear strength of 14-15 grade 8 bolts would/should far exceed pinching the tire in between 2 pieces of aluminum as with existing beadloc systems.


.
Dave



F J B

 
Posts: 4440 | Location: Earth | Registered: February 08, 2006Reply With QuoteReport This Post
DRR Elite
posted Hide Post
I like it, but, how hard do you think they would be to line up on both sides consistently when mounting a tire? I don't mount my own slicks, so I don't have experience with it.
If your idea wasn't going far enough, a steel or aluminum halo could go behind the threaded inserts. Almost a beadlock asides from the rim, and frankly the rim doesn't have a strength issue.
Your idea would also eliminate stripped rim screw holes and screws broken off in the rim screw hole. I dig it.

It seems to me the cost of beadlocks is more than what they ought to be.

Speaking of outside the box, does anyone run tubes in their tires? I never have, but saw the recommendation by I think MT. Am I missing the boat?


Foxtrot Juliet Bravo
 
Posts: 6352 | Location: Illinois | Registered: July 08, 2004Reply With QuoteReport This Post
DRR Elite
posted Hide Post
I PM'ed you Dave


Foxtrot Juliet Bravo
 
Posts: 6352 | Location: Illinois | Registered: July 08, 2004Reply With QuoteReport This Post
  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    longer tire screws

© DragRaceResults.com 2024