DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Monoshock spring
Go
New
Find
Notify
Tools
Reply
  
Monoshock spring
 Login/Join
 
DRR Sportsman
posted
Homebrew monoshock setup. 1.57:1 ratio. Short Afco shock that uses a 10" x 3.5" OD Spring. Typical BBC bracket setup, I think it will be around 1800 - 1850 lbs wet.

500 lbs/in.?
 
Posts: 928 | Location: my own little world | Registered: July 20, 2005Reply With QuoteReport This Post
DRR S/Pro
posted Hide Post
I'd say that sound too high. I'd bet you would be in the 350 range.
 
Posts: 2154 | Location: Tewksbury, MA,USA | Registered: November 03, 2000Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
All depends on suspension geometry. American and Racetech are fairly similar. Undercover is totally different from them. Probably safe to start with 350-400 but your just guessing.
 
Posts: 21 | Location: Pennsylvania | Registered: August 17, 2014Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
My bad I saw the ratio just now.
 
Posts: 21 | Location: Pennsylvania | Registered: August 17, 2014Reply With QuoteReport This Post
DRR Pro
Picture of BarneyB
posted Hide Post
PM sent



WiredTwoWin race car wiring



 
Posts: 2436 | Location: Wadsworth, Ohio | Registered: December 12, 2001Reply With QuoteReport This Post
  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Monoshock spring

© DragRaceResults.com 2024