Page 1 2 3 4 
Go
New
Find
Notify
Tools
Reply
  
engine diapers
 Login/Join
 
DRR Sportsman
Picture of DLR
posted
Looking for recommendations to someone who makes SBC diapers that will snugly fit a deep sump oil pan like a Moroso 21017 or Milodon 30908. DRE is no longer open. I already have a universal one that is excessively large.
 
Posts: 469 | Location: BENTON HARBOR, MI | Registered: August 29, 2007Reply With QuoteReport This Post
DRR Top Comp
Picture of Curly1
posted Hide Post
I have the Pro 1 and really like it.


https://postimg.cc/gallery/np3zpruo/
"Dunning-Kruger Effect"
-a type of Cognitive bias where people with little expertise or ability assume they have superior expertise or ability. This overestimation occurs as a result of the fact that they do not have enough knowledge to know they don't have enough knowledge.

Before you argue with someone ask yourself, "Is this person mentally mature enough to grasp the concept of a different perspective?" If not there is no point to argue.

4X NE2 CHAMPION. 2020 TDRA NE2 Champion
 
Posts: 3971 | Location: United States of Texas | Registered: April 02, 2011Reply With QuoteReport This Post
DRR S/Pro
Picture of "The Bender"
posted Hide Post
If you look at DRE's site, it says closed due to Covid.

Hopefully Dennis will be OK soon and back to work.


272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
 
Posts: 3096 | Location: Yes | Registered: July 08, 2009Reply With QuoteReport This Post
DRR Sportsman
posted Hide Post
I sure hope so I'm needing a new one after 10+ yrs on this one, only needed it once but it saved my car, I have no doubt.
 
Posts: 604 | Location: nw ohio | Registered: November 20, 2001Reply With QuoteReport This Post
DRR Pro
Picture of CURTIS REED
posted Hide Post
quote:
Originally posted by Curly1:
I have the Pro 1 and really like it.


Does the Pro1 have the horizontal adjustment strap at the back to tighten it around the sump? I have a DRE and was hoping he would be well and back in business soon.



____________________________
2017 and 2018 Osage Casinos Tulsa Raceway Park No-Box Champion

2018 Div4 Goodguys Hammer award winner
 
Posts: 2910 | Location: KIEFER, OK. | Registered: August 17, 2007Reply With QuoteReport This Post
DRR Pro
posted Hide Post
quote:
I have a DRE and was hoping he would be well and back in business soon.

he has retired...i am looking for another custom making diaper company as well
 
Posts: 1424 | Location: united states | Registered: January 16, 2006Reply With QuoteReport This Post
DRR Sportsman
Picture of smashm
posted Hide Post
Give Joe West at J&J a call. Just picked up one of his for my new to me car. He also made my ballistic diaper for my last one. 330-465-7392
 
Posts: 68 | Location: Southwest Florida | Registered: June 07, 2009Reply With QuoteReport This Post



DRR Elite
posted Hide Post
quote:
Originally posted by jenavet:
quote:
I have a DRE and was hoping he would be well and back in business soon.

he has retired...i am looking for another custom making diaper company as well


How did you realize this? I don't see anything on the website.


Foxtrot Juliet Bravo
 
Posts: 6361 | Location: Illinois | Registered: July 08, 2004Reply With QuoteReport This Post
DRR Top Comp
Picture of ChuckT
posted Hide Post
I am sorry to hear that about DRE. I ordered mine for my 455 Olds earlier this year. I don't see anything about him retiring on the site?

Maybe fill out the order form and see if he calls?


'81 Cutlass, KX05, Keystone Raceway Park
Millerstown Pic-A-Part, Tarentum, PA
Wholesale Transmission, New Kensington, PA
Thinking of Nikki and Mark - forever 53
 
Posts: 7228 | Location: Pittsburgh | Registered: December 07, 2005Reply With QuoteReport This Post
DRR Trophy
Picture of rallye bob
posted Hide Post
Are diapers still required in NHRA? Scroll through all of these pictures....
https://www.motortrend.com/eve...57-88ec-7f274f78d39a
 
Posts: 22 | Location: usa | Registered: December 24, 2009Reply With QuoteReport This Post
DRR S/Pro
Picture of "The Bender"
posted Hide Post
quote:
Originally posted by rallye bob:
Are diapers still required in NHRA? Scroll through all of these pictures....
https://www.motortrend.com/eve...57-88ec-7f274f78d39a


Interesting.

Didn't look at all of them, but did see a 9 second dial with no diaper.......


272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
 
Posts: 3096 | Location: Yes | Registered: July 08, 2009Reply With QuoteReport This Post
DRR Elite
posted Hide Post
A diaper or pan is something everyone gripes about until they test one. They are good for everyone at the track with the shorter cleanups and fewer cars sliding around after knocking out a rod. Sorry to hear about Dennis no longer in the business. Seemed like good products and a decent fella.


Foxtrot Juliet Bravo
 
Posts: 6361 | Location: Illinois | Registered: July 08, 2004Reply With QuoteReport This Post
DRR Top Comp
Picture of Curly1
posted Hide Post
quote:
Originally posted by Bucky:
A diaper or pan is something everyone gripes about until they test one. They are good for everyone at the track with the shorter cleanups and fewer cars sliding around after knocking out a rod. Sorry to hear about Dennis no longer in the business. Seemed like good products and a decent fella.


I agree with Bucky here.

A Diaper has saved many cars and possibly some lives from crashing due to oil and water under tires. I think it is one of most important safety items on a car and should be a strict requirement.

I have lost a motor in a door car at 140 MPH and it was a handful and it made a huge mess. That was around 2001? when Diapers were just coming out and stupid expensive. Now they are cheap and no excuse in my mind not to have one now.


https://postimg.cc/gallery/np3zpruo/
"Dunning-Kruger Effect"
-a type of Cognitive bias where people with little expertise or ability assume they have superior expertise or ability. This overestimation occurs as a result of the fact that they do not have enough knowledge to know they don't have enough knowledge.

Before you argue with someone ask yourself, "Is this person mentally mature enough to grasp the concept of a different perspective?" If not there is no point to argue.

4X NE2 CHAMPION. 2020 TDRA NE2 Champion
 
Posts: 3971 | Location: United States of Texas | Registered: April 02, 2011Reply With QuoteReport This Post
DRR Sportsman
posted Hide Post
If it has a roll bar it needs a diaper that simple, whine about it till you chuck a rod at 1000" and start looking for a new chassis. I smoked a motor at Pittsburgh at the stripe about 12 yrs ago coasted to the turn off and had a spot of oil about the size of a quarter on the ground, the diaper was full of 8qts of oil and alot of water, you make your own call...
 
Posts: 604 | Location: nw ohio | Registered: November 20, 2001Reply With QuoteReport This Post



DRR Sportsman
posted Hide Post
quote:
Originally posted by HR3377:
If it has a roll bar it needs a diaper that simple, whine about it till you chuck a rod at 1000" and start looking for a new chassis. I smoked a motor at Pittsburgh at the stripe about 12 yrs ago coasted to the turn off and had a spot of oil about the size of a quarter on the ground, the diaper was full of 8qts of oil and alot of water, you make your own call...


Tough to argue with that sound logic.


BG
 
Posts: 758 | Location: Florence, SC | Registered: August 25, 2019Reply With QuoteReport This Post
DRR Sportsman
Picture of FootbrakeJim
posted Hide Post
quote:
Originally posted by BG7X77:
quote:
Originally posted by HR3377:
If it has a roll bar it needs a diaper that simple, whine about it till you chuck a rod at 1000" and start looking for a new chassis. I smoked a motor at Pittsburgh at the stripe about 12 yrs ago coasted to the turn off and had a spot of oil about the size of a quarter on the ground, the diaper was full of 8qts of oil and alot of water, you make your own call...


Tough to argue with that sound logic.

^^^ X2

Also looking for Diaper recommendations for a BBC in a caged 68 Camaro. Good fit and relative ease in servicing the engine would be nice features.


Dan "Jim" Moore
Much too young to feel this damn old!!
 
Posts: 1032 | Location: Farmersville, TX  | Registered: December 05, 2002Reply With QuoteReport This Post
DRR Pro
Picture of Eman
posted Hide Post
I messaged DRE, he messaged me back that new owners will be reopening in a week.
 
Posts: 1451 | Location: E TN | Registered: February 13, 2009Reply With QuoteReport This Post
DRR Elite
posted Hide Post
first thing they need to do is get the patterns right because it certainly ain't right for a Moroso 21047 pan! Roll Eyes
 
Posts: 13522 | Location: NJ | Registered: August 20, 2000Reply With QuoteReport This Post
DRR Trophy
Picture of Rick!
posted Hide Post
quote:
Originally posted by HR3377:
If it has a roll bar it needs a diaper that simple, whine about it till you chuck a rod at 1000" and start looking for a new chassis. I smoked a motor at Pittsburgh at the stripe about 12 yrs ago coasted to the turn off and had a spot of oil about the size of a quarter on the ground, the diaper was full of 8qts of oil and alot of water, you make your own call...


Kevlar diaper or standard version? Sometimes a rod cap spits out during the burnout and only slows down when it goes through the diaper. My brother's sponsor now needs to help change his engine's diaper and clean up the engine's bottom.
 
Posts: 81 | Location: behind this screen | Registered: July 30, 2015Reply With QuoteReport This Post
DRR S/Pro
Picture of "The Bender"
posted Hide Post
quote:
Originally posted by Eman:
I messaged DRE, he messaged me back that new owners will be reopening in a week.


Great!

Thanks


272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
 
Posts: 3096 | Location: Yes | Registered: July 08, 2009Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2 3 4  
 


© DragRaceResults.com 2024