Share |
Go
New
Find
Notify
Tools
Reply
  
spark plug wire for Blower engine
 Login/Join
 
DRR Pro
Picture of Bruce Williams
posted
Any thoughts suggestions on plug wires for a blown BBC?
I have always ran the MSD wires on my bracket stuff with great success.
Going through an issue with the new blower setup and am trying to systematically replace all components that may somehow remotely be able to cause this engine shutdown on launch.
It has also been suggested to run a resistor spark plug that the RF from the spark plug is causing a problem with the EFI.
So does anyone have a resistor plug number for a BBC 14 mm 3/4 reach 5/8 head?
Any preference of plug wires over the MSD 8.5 stuff?


Bruce Lee Cool

Experience is what you get when you don't get what you want.
 
Posts: 1908 | Location: Chandler Arizona | Registered: August 11, 2005Reply With QuoteReport This Post
DRR S/Pro
Picture of "The Bender"
posted Hide Post
I've been running MSD wires with the grid controlling an MSD 8+ for several years with no issues


272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'


www.ftiperformance.com

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner
 
Posts: 2328 | Location: Yes | Registered: July 08, 2009Reply With QuoteReport This Post
DRR Pro
Picture of Big Steve
posted Hide Post
I am also using MSD wires with MSD 8+ ignition
 
Posts: 958 | Location: On the the dark side now | Registered: April 30, 2010Reply With QuoteReport This Post
DRR Top Comp
posted Hide Post
Bruce,

Not familiar with a blower engine but I really like my Magnecor wires. I hear good things about Firecore also. Good luck!


Clowns to the left of me, Jokers to the right. Here I am.......
 
Posts: 4640 | Location: stuck in the middle with you! | Registered: March 11, 2002Reply With QuoteReport This Post
  Powered by Social Strata  
 


© DragRaceResults.com 2018