spark plug wire for Blower engine

Bracket Talk

This topic can be found at:
https://drr.infopop.cc/eve/forums/a/tpc/f/6347064395/m/6307010386

May 31, 2019, 05:13 PM

Bruce Williams

spark plug wire for Blower engine

Any thoughts suggestions on plug wires for a blown BBC?
I have always ran the MSD wires on my bracket stuff with great success.
Going through an issue with the new blower setup and am trying to systematically replace all components that may somehow remotely be able to cause this engine shutdown on launch.
It has also been suggested to run a resistor spark plug that the RF from the spark plug is causing a problem with the EFI.
So does anyone have a resistor plug number for a BBC 14 mm 3/4 reach 5/8 head?
Any preference of plug wires over the MSD 8.5 stuff?

May 31, 2019, 06:56 PM

"The Bender"

I've been running MSD wires with the grid controlling an MSD 8+ for several years with no issues

272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.

May 31, 2019, 08:24 PM

Big Steve

I am also using MSD wires with MSD 8+ ignition

June 03, 2019, 03:33 PM

Cashflow

Bruce,

Not familiar with a blower engine but I really like my Magnecor wires. I hear good things about Firecore also. Good luck!