Share |
DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Race Cars / Parts / Equipment    BBC Nitrous Intake, Heads, and Lots More
Go
New
Find
Notify
Tools
Reply
  
BBC Nitrous Intake, Heads, and Lots More
 Login/Join 
DRR Sportsman
Picture of David Gerard
posted
Nitrous Parts Approximate List/Ask Prices

Pictures on Request!

Moving from a Nitrous Package to a ProCharger package and no longer need these parts.

Prefer to sell as a complete package, but will consider sell cylinder heads, piston, cam, crank assembly as a package and Intake system as a package.

Complete - List: $18,000 Asking $11,500 or best reasonable offer

Head Package - List: About $12,000 Asking $7,500 or best reasonable offer

Heads: [List: @ $2,200.00 each Ask: $2650.00 for pair] Serial # SAR2067 Brodix “Big Duke” 18° Pro Stock style, PB1802; serial: PF979 & PG025; Intake Port: 496cc; Chamber Vol.: 88.3 cc ; Intake valve: 2.400”; Exhaust valve: 1.900”; Valve Angle:18° and 4° Intake, 9° and 4° Exhaust; Flat Milling: .0055 in Per cc; : Standard 18° x 9° Valve Angle; Intake Valves: 2.400 x 6.600 o.a.l. - BR 81660, 45° Seat Angle; Exhaust Valves: 1.900 x 6.450 o.a.l. - BR 81645, 45° Seat Angle; [studs/nuts [exhaust & valve cover]
• Cam: [List: @ $398.00 Ask: $240.00] Comp Cams: Serial: 113901-17; 4/7 swap; R117; I: 2049B - 2870 @.050 – 3200 @ .020 - .527” lift 0.922 lift at valve; E: 1878B - 3060 @.050 – 3440 @ .020 - .516 lift; 0.903 lift at valve. Valve to piston [1170L.C.]: 0.118” Intake and 0.135” exhaust.
• Rockers: [List: @ $2,850.00 Ask: $1750.00] T&D 3036, 1.75:1 Intake/Exhaust. Stand part no.: TBC-E 00524. Spring tool: 07065
• Valve Springs: [List: @ $710.00 Ask: $425.00] Manley – 221449-16; NexTek® springs; 1.677" Triple; Inst. 350 Lbs. At 2.200"; Open 1070 Lbs. At 1.200"; Coil bind: 1.142"
• Retainers: [List: @ $220.00 Ask: $135.00] Titanium; triple spring: 1.470” O.D.; Inner spring O.D. 5/8-0.605”; Middle spring O.D. 55/64-0.8605”; Outer spring O.D. 1 3/16”-1.1865”
• Head Studs, washers, and nuts: [List: @ $398.00 Ask: $240.00] Brodix for Big Duke heads.
• Valve covers and hold down studs: Sonny’s fabricated. Moroso oil separator and fitting for vacuum pump, Oil filler.
• Pistons: [List: @ $1800.00 Ask: $1000.00] BME P494SD -494 solid dome; 4.5300”; comp height: 1.240; PF91 Forging; custom dome. PH04 Oil Rail Spacers #RA4600; job card #46074 (653G), Compression ratio: @14.3; Valve to piston [3170 L.C. @ 1140 installed]: Clearance: 0.090” Intake and 0.130” exhaust. 18.1 CC dome; Deck height: -0.024”
• Pins: WP35 .990x2.925 9310 HDTW (195G); PH10 .990x .075 round wire locks.
• Crank: [List: @ $1.050.00 Ask: $650.00] 4.25” stroke, Manley Pro Series 90290 [new 1/2022]

Intake Package - List: About $6,450 Asking $4,000 or best reasonable offer

• Intake Manifold: [List: @ $2,700.00 Ask: $1600.00] Hogan Manifolds – custom for two C&J 4500 carburetors and nitrous single stage. With both single and dual Dominator tops. Edelbrock linkage for dual carburetors. Induction Solution documentation and jets for 400 HP, 450 HP, 500 HP, and 550 HP. Nitrous purge solenoid. Assembly for setting launch nitrous pressure: Digital nitrous pressure gauge, bracket, push button and wiring. Spare solenoid repair kits with tools.
• Nitrous System: [List: @ $750.00 Ask: $450.00] Nitrous Supply annular nitrous/fuel nozzle port system for 400-500 HP. Flowed and serviced by Induction Solutions on 1/2022.
• Starting Line Enhancement:
o Plates: [List: @ $179.00 Ask: $107.00] Two 0.075” Nitrous Express NXO-22-4500-TR Plates and Jets
o Solenoids: Nitrous Supply [List: @ $119.00 Ask: $71.00]
• Carburetors: [List: @ $980.00 each Ask: $590.00] Two 1150 CFM Holley Dominators #: 0-80186-1; modified by C&J Carbs for three circuits. Edelbrock/Enderle linkage kit [Main: 0.036”; Intermediate: 0.063”; Idle: 0.031”]
• Regulators: Primary to Carbs
o Aeromotive 1000 [List: @ $200.00 Ask: $120.00]
o N2O fuel: Holley 12-841 [List: @ $137.00 Ask: $82]
• Spacers: [List: @ $35.00 each Ask: $25.00] Two 0.025” phenolics spacers.
• Custom scoop tray: with two joined dominator venturi air horns [Asking $150.00].

This message has been edited. Last edited by: David Gerard,

 
Posts: 375 | Location: Fullerton, CA | Registered: June 08, 2008Reply With QuoteReport This Post
  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Race Cars / Parts / Equipment    BBC Nitrous Intake, Heads, and Lots More

© DragRaceResults.com 2022